Administrator Password Older Releases

[TeltronMan]

Working on a client that has an older version of the BCM50. I am attempting to log into the unit utilizing the nnadmin/PlsChgMe!
default password which I am unsuccessful. My question for my BCM guru's is I vaguely remember a different password combination for older versions of the BCM? Am I correct with this, if yes please provide!

John

 

[EddieDuece]

You connecting with a cross over cable?

 

[exsmogger]

Unless you know of a login/password combination that was added to the BCM50 there is no other login if PlsChgMe! was changed. You can do a level 1 reset to default the system, but you must have the license file available to reinstall. Otherwise you'll have a doorstop.

The BCM50 uses a straight-through ethernet cable. The older BCM 200/400 uses a crossover cable.

Brian Cox
Georgia Telephone

http://Georgia-Telephone.com

http://www.linkedin.com/in/briancox1952

 

[snowman50]

The older passwords were for the eeadmin account on 2.5 systems
Not for the bcm50 range I'm afraid.
Level 1reset will be required