Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Admin Software on UC540

Status
Not open for further replies.

eartel

Vendor
Mar 10, 2003
214
US
We have a Cisco UC540 system and would like to make changes to the system but do not have the admin software on our computers. I went to the Cisco web site to download the software but they want us to be on contract with a dealer. is there any place I can download the management software for free? Any assistance will be appreciated.

 
Cisco doesn't let you get too much software for free. Going to need a contract to get it.

Certifications:
A+
Network+
CCENT
CCNA Voice
TVOICE
CAPPS
 
If its a UC540, the management software "should" be Cisco Configuration Assistant. This is normally free software that can be downloaded with a guest CCO account. Just register online and then download. Cisco makes some (not a lot) of software available with just guest status.
 
Thanks azaghul33, I was able to register and download the software and now we are able to make changes to our system. We are also able to login to VM through the browser. One issue we are unable to resolve, is to change the programming on our Day Auto Attendant. In the VM it shows an id of 398 and when we attempted to access that from dialing 397(tel admin) it asks for a pin ID. We don't know it and don't know where to retrieve it or change it. What is the procedure to change the recording on the VM Auto Att.

 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top