Adjust default margins on Canon ir105 PCL 1

[keithsutherland]

I'm not a programmer so I may need to engage a professional to resolve this problem (Canon are reluctant to help). The default side margins on the Canon ir105 PCL driver are set at 7mm., although the machine (if used in copier mode) only requires 2mm. and I need some help as to how to alter the driver to reduce the margin.

Keithsutherland

 

[UncleRick]

No such luck. The unprintable area for the iR105 using PCL5e is 50 pixels per margin @ 300dpi. that works out to about 4.5 mm. You can not get less. You can not adjust the printer driver. Perhaps try the HP LJ 4000PCL driver for that particular application.