Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Adjuncts Extensions Appearing on 4412d+ phones

Status
Not open for further replies.

vsop345

MIS
Jul 8, 2003
18
US
We recently had repaired a 024tdl board and it has been installed for about 10 days. Curiosly, somehow all of the 4412d phone on our this 024tdl been assigned the adjuncts number instead of what was previously programmed. Is this an indication that this board is bad or how do I get out of this?
 

This is a strange one.

Was there another board installed ahead of this one?
 
This board is in slot 2 and in slot1 is another 024tdl. Slot3 is a gslid. This is the same configuration we have had since getting the pbx.
 
Something else I just found is in Winspm system inventory it shows as "no fw". I assume that's firmware. Also, in maintenance status the mode shows nothing and R is on.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top