Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

additional external SCSI disk on Netra 20

Status
Not open for further replies.
tkranz

tkranz

Technical User
Jun 19, 2007
1
DE
Hi

I try to add a 146 gb disk to my netra 20 adn have the following problem

cmd1a:/ ROOT > uname -a
SunOS cmd1a 5.8 Generic_117350-16 sun4u sparc SUNW,Netra-T4
cmd1a:/ ROOT > devfsadm
cmd1a:/ ROOT > format
Searching for disks...done

c6t0d0: configured with capacity of 136.72GB
c6t1d0: configured with capacity of 136.72GB
c6t2d0: configured with capacity of 136.72GB
c6t3d0: configured with capacity of 136.72GB
c6t4d0: configured with capacity of 136.72GB
c6t5d0: configured with capacity of 136.72GB
c6t6d0: configured with capacity of 136.72GB


AVAILABLE DISK SELECTIONS:
0. c1t0d0 <SUN72G cyl 14087 alt 2 hd 24 sec 424>
/pci@8,600000/SUNW,qlc@4/fp@0,0/ssd@w2100000c50f19af8,0
1. c1t1d0 <SUN72G cyl 14087 alt 2 hd 24 sec 424>
/pci@8,600000/SUNW,qlc@4/fp@0,0/ssd@w2100000c50f1b281,0
2. c6t0d0 <IBM-IC35L146UWDY10-0-S2AB cyl 36313 alt 2 hd 12 sec 658>
/pci@8,700000/scsi@6,1/sd@0,0
3. c6t1d0 <IBM-IC35L146UWDY10-0-S2AB cyl 36313 alt 2 hd 12 sec 658>
/pci@8,700000/scsi@6,1/sd@1,0
4. c6t2d0 <IBM-IC35L146UWDY10-0-S2AB cyl 36313 alt 2 hd 12 sec 658>
/pci@8,700000/scsi@6,1/sd@2,0
5. c6t3d0 <IBM-IC35L146UWDY10-0-S2AB cyl 36313 alt 2 hd 12 sec 658>
/pci@8,700000/scsi@6,1/sd@3,0
6. c6t4d0 <IBM-IC35L146UWDY10-0-S2AB cyl 36313 alt 2 hd 12 sec 658>
/pci@8,700000/scsi@6,1/sd@4,0
7. c6t5d0 <IBM-IC35L146UWDY10-0-S2AB cyl 36313 alt 2 hd 12 sec 658>
/pci@8,700000/scsi@6,1/sd@5,0
8. c6t6d0 <IBM-IC35L146UWDY10-0-S2AB cyl 36313 alt 2 hd 12 sec 658>
/pci@8,700000/scsi@6,1/sd@6,0
9. c6t7d0 <drive not available: formatting>
/pci@8,700000/scsi@6,1/sd@7,0
10. c9t1d0 <LSI-ProFibre4000R-5899 cyl 8672 alt 2 hd 128 sec 128>
/pci@8,600000/fibre-channel@1/sd@1,0
11. c9t1d1 <LSI-ProFibre4000R-5899 cyl 8672 alt 2 hd 128 sec 128>
/pci@8,600000/fibre-channel@1/sd@1,1
12. c9t1d2 <LSI-ProFibre4000R-5899 cyl 8672 alt 2 hd 128 sec 128>
/pci@8,600000/fibre-channel@1/sd@1,2
13. c9t1d3 <LSI-ProFibre4000R-5899 cyl 4333 alt 2 hd 128 sec 128>
/pci@8,600000/fibre-channel@1/sd@1,3
14. c9t1d4 <LSI-ProFibre4000R-5899 cyl 4333 alt 2 hd 128 sec 128>
/pci@8,600000/fibre-channel@1/sd@1,4
15. c9t1d5 <LSI-ProFibre4000R-5899 cyl 4333 alt 2 hd 128 sec 128>
/pci@8,600000/fibre-channel@1/sd@1,5
16. c9t1d6 <drive type unknown>
/pci@8,600000/fibre-channel@1/sd@1,6
17. c9t1d7 <drive type unknown>
/pci@8,600000/fibre-channel@1/sd@1,7
18. c9t1d8 <LSI-ProFibre4000R-5899 cyl 4333 alt 2 hd 128 sec 128>
/pci@8,600000/fibre-channel@1/sd@1,8
19. c9t1d9 <LSI-ProFibre4000R-5899 cyl 8672 alt 2 hd 128 sec 128>
/pci@8,600000/fibre-channel@1/sd@1,9
20. c9t1d10 <LSI-ProFibre4000R-5899 cyl 8672 alt 2 hd 128 sec 128>
/pci@8,600000/fibre-channel@1/sd@1,a
21. c9t1d11 <LSI-ProFibre4000R-5899 cyl 4333 alt 2 hd 128 sec 128>
/pci@8,600000/fibre-channel@1/sd@1,b
22. c10t3d0 <LSI-ProFibre4000R-5899 cyl 8672 alt 2 hd 128 sec 128>
/pci@8,600000/fibre-channel@1,1/sd@3,0
23. c10t3d1 <LSI-ProFibre4000R-5899 cyl 8672 alt 2 hd 128 sec 128>
/pci@8,600000/fibre-channel@1,1/sd@3,1
24. c10t3d2 <LSI-ProFibre4000R-5899 cyl 8672 alt 2 hd 128 sec 128>
/pci@8,600000/fibre-channel@1,1/sd@3,2
25. c10t3d3 <LSI-ProFibre4000R-5899 cyl 4333 alt 2 hd 128 sec 128>
/pci@8,600000/fibre-channel@1,1/sd@3,3
26. c10t3d4 <LSI-ProFibre4000R-5899 cyl 4333 alt 2 hd 128 sec 128>
/pci@8,600000/fibre-channel@1,1/sd@3,4
27. c10t3d5 <LSI-ProFibre4000R-5899 cyl 4333 alt 2 hd 128 sec 128>
/pci@8,600000/fibre-channel@1,1/sd@3,5
28. c10t3d6 <drive type unknown>
/pci@8,600000/fibre-channel@1,1/sd@3,6
29. c10t3d7 <drive type unknown>
/pci@8,600000/fibre-channel@1,1/sd@3,7
30. c10t3d8 <LSI-ProFibre4000R-5899 cyl 4333 alt 2 hd 128 sec 128>
/pci@8,600000/fibre-channel@1,1/sd@3,8
31. c10t3d9 <LSI-ProFibre4000R-5899 cyl 8672 alt 2 hd 128 sec 128>
/pci@8,600000/fibre-channel@1,1/sd@3,9
32. c10t3d10 <LSI-ProFibre4000R-5899 cyl 8672 alt 2 hd 128 sec 128>
/pci@8,600000/fibre-channel@1,1/sd@3,a
33. c10t3d11 <LSI-ProFibre4000R-5899 cyl 4333 alt 2 hd 128 sec 128>
/pci@8,600000/fibre-channel@1,1/sd@3,b
Specify disk (enter its number): 2
selecting c6t0d0
[disk unformatted]
Disk not labeled. Label it now? yes


FORMAT MENU:
disk - select a disk
type - select (define) a disk type
partition - select (define) a partition table
current - describe the current disk
format - format and analyze the disk
repair - repair a defective sector
label - write label to the disk
analyze - surface analysis
defect - defect list management
backup - search for backup labels
verify - read and display labels
save - save new disk/partition definitions
inquiry - show vendor, product and revision
volname - set 8-character volume name
!<cmd> - execute <cmd>, then return
quit
format> type


AVAILABLE DRIVE TYPES:
0. Auto configure
1. Quantum ProDrive 80S
2. Quantum ProDrive 105S
3. CDC Wren IV 94171-344
4. SUN0104
5. SUN0207
6. SUN0327
7. SUN0340
8. SUN0424
9. SUN0535
10. SUN0669
11. SUN1.0G
12. SUN1.05
13. SUN1.3G
14. SUN2.1G
15. SUN2.9G
16. Zip 100
17. Zip 250
18. SUN72G
19. LSI-ProFibre4000R-5899
20. LSI-ProFibre4000R-5899
21. IBM-IC35L146UWDY10-0-S2AB
22. other
Specify disk type (enter its number)[21]: 21
selecting c6t0d0
[disk formatted]
format> format
Ready to format. Formatting cannot be interrupted
and takes 221 minutes (estimated). Continue? yes
Beginning format. The current time is Tue Jun 19 12:47:17 2007

Formatting...
done

Verifying media...
pass 0 - pattern = 0xc6dec6de
0/0/504

Warning:Drive may be reserved or has been removed, aborting surface analysis.
Warning: Unable to get capacity. Cannot check geometry
format> help
Expecting one of the following: (abbreviations ok):
disk - select a disk
type - select (define) a disk type
partition - select (define) a partition table
current - describe the current disk
format - format and analyze the disk
repair - repair a defective sector
label - write label to the disk
analyze - surface analysis
defect - defect list management
backup - search for backup labels
verify - read and display labels
save - save new disk/partition definitions
inquiry - show vendor, product and revision
volname - set 8-character volume name
!<cmd> - execute <cmd>, then return
quit

format>

what should i do now ? as it seems the format is ok but the surface analysis failed ???

br

Thomas
 
Status
Not open for further replies.

Similar threads

ZahidHaseeb1978
  • Locked
  • Question
Start /SYS on SUN SPARC does not start machine [SUN SPARC ENTERPRISE T-5240]
Replies
0
Views
232
ZahidHaseeb1978
ZahidHaseeb1978
Nitro901
  • Locked
  • Question
Adding a 2nd disk drive
Replies
1
Views
87
Nitro901
Nitro901
amfirooz
  • Locked
  • Question
Solaris 10 on VMWare Workstation
Replies
0
Views
226
amfirooz
amfirooz
CChambleeJr
  • Locked
  • Question
How to create file system on USB Drive
Replies
1
Views
149
SamBones
SamBones
lbslbs
  • Locked
  • Question
Install Samba 4.3.0 on Solaris 10
Replies
0
Views
91
lbslbs
lbslbs

Part and Inventory Search

Sponsor

Back
Top