Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

addition of 2nd Lim is crash can not need to shutdown (Urgently)

Status
Not open for further replies.

thytith

IS-IT--Management
Aug 23, 2014
16
KH
Dear All

I need your help currently i have a urgent problem that our 2nd lim is crash can not power up due to flooding

any one have any idea for fix this problem,
we want to shutdown until we have new LIM to replace at that branch

Hope to hear from you very soon
Thank,
 
stick a temporary one in next to lim 1 -just needs basic cards gjul ,lpu5 etc
 
Dear Ceejay55

I am not clear understand about that,

please help check detail explain

Now we got

END
<alrei;

MESSAGE FROM OPERATING SYSTEM:
RELOAD REQUESTED
SYSTEM INITIATED DATA
NO ANSWER FROM LIM 2
END
<allop;
ALARM LOG

IDENTITY: UNAKRT
VERSION: CXP1010101/4/TSW-SP08/R9B

DATE: 29OCT15 TIME: 14:34:00

CLASS: 4

35 TRAFFIC HANDLING COMMON FUNCTION OUT OF ORDER
DATE TIME ALP NOIF UNIT
29OCT15 14:33:51 2 1 DDEM

35 TRAFFIC HANDLING COMMON FUNCTION OUT OF ORDER
DATE TIME ALP NOIF UNIT
29OCT15 14:33:51 3 1 DDGM

35 TRAFFIC HANDLING COMMON FUNCTION OUT OF ORDER
DATE TIME ALP NOIF UNIT
29OCT15 14:33:51 4 1 DMGM

35 TRAFFIC HANDLING COMMON FUNCTION OUT OF ORDER
DATE TIME ALP NOIF UNIT
29OCT15 14:33:51 6 1 DPM

35 TRAFFIC HANDLING COMMON FUNCTION OUT OF ORDER
DATE TIME ALP NOIF UNIT
29OCT15 14:33:52 13 1 DTM


CLASS: 3

32 INCREMENTATION ALARM FOR ALARM CLASS 2
DATE TIME ALP NOIF
29OCT15 14:33:52 14 2

278 CIL DATA LOST FOR ONE OR MORE OUTPUT UNITS
DATE TIME ALP NOIF UNIT EQU INF1
29OCT15 14:34:00 17 1 CLOP 001-*-**-** 2


CLASS: 2

37 ORDINARY COMMON FUNCTION OUT OF ORDER
DATE TIME ALP NOIF UNIT
29OCT15 14:33:51 1 1 FAM2

37 ORDINARY COMMON FUNCTION OUT OF ORDER
DATE TIME ALP NOIF UNIT
29OCT15 14:33:51 5 1 CTLMP

37 ORDINARY COMMON FUNCTION OUT OF ORDER
DATE TIME ALP NOIF UNIT
29OCT15 14:33:52 7 1 CLOM

37 ORDINARY COMMON FUNCTION OUT OF ORDER
DATE TIME ALP NOIF UNIT
29OCT15 14:33:52 8 1 DIM

37 ORDINARY COMMON FUNCTION OUT OF ORDER
DATE TIME ALP NOIF UNIT
29OCT15 14:33:52 9 1 RA1M

37 ORDINARY COMMON FUNCTION OUT OF ORDER
DATE TIME ALP NOIF UNIT
29OCT15 14:33:52 10 1 AOM1

37 ORDINARY COMMON FUNCTION OUT OF ORDER
DATE TIME ALP NOIF UNIT
29OCT15 14:33:52 11 1 AOM2

37 ORDINARY COMMON FUNCTION OUT OF ORDER
DATE TIME ALP NOIF UNIT
29OCT15 14:33:52 12 1 ROM

37 ORDINARY COMMON FUNCTION OUT OF ORDER
DATE TIME ALP NOIF UNIT
29OCT15 14:33:53 15 1 AUM1

37 ORDINARY COMMON FUNCTION OUT OF ORDER
DATE TIME ALP NOIF UNIT
29OCT15 14:33:53 16 1 AUM2


LAST ALREI: 29OCT15, 14:33:51

END
<
TIME OUT WARNING

i can not run many command event routing , system command to check status, due

System alarm "System is LOCK LIM"

Thank,

 
Hi,
the only one think you can do, is to install a "LIM2" on the site where LIM 1 is placed.
This LIM 2 is an interim solution, only Magazine 0 with GJU-L, LPU5, LSU, DSU and DC-DC are needed.
When this "LIM 2" is up and running you can run commands, make changes in your System.

Now you have time to replace the "flooded" HW on your other site.

If the HW is changed, disconnect the interim solution and connect your "new" LIM 2.

best regards,
Norbert
 
Dear Snor

thank , i have done this now

Thank,
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top