Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Adding VAL Board ?

Status
Not open for further replies.

allen049

Technical User
Mar 21, 2005
128
US
I'm trying to add a VAL Board and just want to make sure that I haven't missed anything. I add it but unable to ping the board when I'm done adding it. I have a S8710 G3R V13.

add ip-interface 15a07
Add Node Name = val05
subnet Mask = 255.255.255.0
Gateway Address = 10.4.4.11
Enable Ethernet Port = Y
Auto = N
Speed = 100Mbps
Duplex = Full



 
Yes everything is OK, but make sure you set the port speed 100Mbps full duplex in your LAN switch as well.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top