Adding Stations

[StumblingForward]

I have a Partner system in a medical arts suite at the hospital i work at. The only model number I could find on the system is 103R, (if there is another way to tell please inform me and i will post it), what i am needing to know is if i can add another station to the system without having any expense, The system is used in 2 separate offices, I have 8 stations installed now, 4 in each office and need a 9nth for a new Doctor.
If not is there a way to split a station and have 2 phones as the same station.
any help would be great.

Before God we are all equally wise - and equally foolish.
Albert Einstein

 

[Dexman]

Depending on which Partner system you have will determine how much of an expense the hospital will be looking at.

Assuming you have a Partner ACS processor, you can press "Feature 5 9" from any idle telephone with a built in display and the hardware revision and software revision will appear on the display.

If you have a Partner ACS R1-R6, the stand alone processor will handle 3 telephone lines and 8 telephone extensions. The Partner ACS R7 processor will handle 5 telephone lines and 9 telephone extensions.

If all 8 extensions are currently in use, and another telephone added, the system would have to be expanded by purchasing a 5 module carrier and a suitable expansion module.

 

[StumblingForward]

From your post Dexman i think i have the ACS R7, I have 5 lines going into the unit. thanks for your post.

Before God we are all equally wise - and equally foolish.
Albert Einstein