ADDING PRI 2

[GoldenGirls]

I have a opt 11 and it has 4 trunk cards in it all ready.I am to add PRI - T-1 to it can i add the card to the system hot,and will it let me build the routes and all thats is needed to my this work.. Not sure what to do our were to start. Thanks for the info. cindy

 

[mluckie1]

The new T1 card need to be in the first cabinet. Everything can be done live. Build PRI in LD 17 under CEQU DLOP. Is this a TMDI Card or NTAK09 with a daughter board?

 

[johnpoole]

add the card in 17, build the dch in 17, add the route in 16 add the trunks in 14, enl msdl x fld in 96 (or tmdi) enll x in 60 stat in 60.. go home, 30 minutes start to finish, but maybe not on the 1st one

john poole
bellsouth business
columbia,sc

 

[50fl]

Don't forget the Digital Data Block (DDB) in overlay 73

 

[hawks]

Don't forget LD 73 and DDB if you don't have one built already.

 

[johnpoole]

there's as echo in here, if it's the 1st pri in the switch you'll have to add isdn yes to your net data

john poole
bellsouth business
columbia,sc

 

[GoldenGirls]

Thanks to all for the info ,I will be there today or the next,To start to set this up,I will let you know.I will stat
all loads in question.. Thanks again Cindy