Adding new user-profile in CM4 1

[Phoneman2]

I have added user profile "mary", now I can't give her a password to log in.

Wisdom is Knowledge
that is Shared

Thanks All Phoneman2

 

[Mitch672]

logins are done on the "administrator accounts" page. The "user-profile" is for permissions. You should probably read the white paper on CM4 logins:

http://support.avaya.com/japple/css...eID=305904&temp.bucketID=135826&PAGE=Document

mitch


AVAYA Certified Specialist

 

[Phoneman2]

Thanks Mitch for the light bathroom reading.
I also downloaded the 555-245-205 from Avaya (all 10meg)

Now what is the short cut to getting a new login working?


Wisdom is Knowledge
that is Shared

Thanks All Phoneman2

 

[Mitch672]

open a web browser to the IP of the active processor, click on "Launch Maintenance Web Interface", on the left panel, below "Security" is: "Administrator Accounts", click on that, and from there you can add a login. first group would probably be "susers", secondary profile would be "prof18", or you could make a custome profile, like "prof20" if you want to restrict the login. You also set the password and expiration date on this page as well.

mitch


AVAYA Certified Specialist