Adding more Digital TNs to Options 51, 61 and 81

[Whitt12]

I need to find an NTP or documentation on how to add more TNs to my Meridian Systems. Can anyone out there give me an idea where to start looking. I have gone to the Nortel site but can't find anything, as usual with them.

 

[bigindian65]

you just order ISM's Digital Licenses, it is a keycode change, no ini required. You printed SLT in ld 22? Checked built disabled in 30? Are you tapped out?

Mato' Was'aka

 

[Johnthephoneguy]

Like said above you need licenses, you may also need new Cards, Analog or Digital.

if you add cards, you may have to add cabling, it depends on how good your installer was if they prewired expansions or not.

Sometimes cleaning up your PBX will give you a few Tn's as well.

JohnThePhoneGuy

"If I can't fix it, it's not broke!

 

[Whitt12]

Bigindian65/JohnThePhoneGuy,
Thanks for your help. I did order the ISMs and am ready to get going with this. Just thought it might be more complicated. I'm not totally out to TNs just planning for adding more people and didn't want to run into the situation where I am totally out. I have already checked and the expansion cabinets are in place and also ready to go. Thanks again

 

[bigindian65]

once you receive them, pending your CPU type, you install them in ld 143, and can compare them with the current keycodes prior to installing.

Mato' Was'aka