Adding logo to report is ruining quality 1

[Olorin1]

Hi there,

I have created a few reports which are filled in via an HTML form. When CR8 loads in the browser the logo's quality becomes quite poor. And prints horribly.

(NOTE that in the regular report it looks quite poor as well and i cannot resize it with out ruining it.)

Please let me know how I can add our logo from any format necessary that will not hidder the appearance so much. Will an OLE object do this better than the cut and paste method? Both options seem to be falling short.

Thanks,

David Stephens
HRPAO

 

[kenhamady]

What is the image format?
Have you tried converting it to another format? Ken Hamady

http://www.kenhamady.com/

Crystal Reports Training/Consulting and a
Quick Reference Guide to VB/Crystal (including ADO)

 

[Olorin1]

Hello Ken,

Thanks for replying. Actually i managed to get it to work using the OLE object and a .JIF file. Now the problem is formating it properly with Photoshop. I don't know if you have used this method before but after a few times i got it to work, but it isn't very reliable. It seems to do odd things to the logo. If you have tried this do you have any tips?

If not thanks for your help, and take care.

David Stephens
HRPAO

 

[kenhamady]

I have used BMPs on several reports and they don't seem to give me any problems. I don't use OLE but just insert it as a static image (Insert Picture). Ken Hamady

http://www.kenhamady.com/

Crystal Reports Training/Consulting and a
Quick Reference Guide to VB/Crystal (including ADO)

 

[Olorin1]

OK... thanks for your help.
DS