Hi,
I have connected a server running Solaris 10 x86 to a storage, it looks like trials and errors have generated
many bad disks, I now want to remove them and reboot the system to get a normal situation, please which
command to use ? I'll continue with system file and mounting, please tell me commands syntax or a link
to achieve that.
By the way, I executed "devfsadm -C" and rebooted the system.
The "format" command shows this :
-----------------------------------------------------------
Servxap@root:${PWD}>format
Searching for disks...
The device does not support mode page 3 or page 4,
or the reported geometry info is invalid.
WARNING: Disk geometry is based on capacity data.
The current rpm value 0 is invalid, adjusting it to 3600
Error: can't open selected disk '/dev/rdsk/c2t0d0p0'.
done
c2t0d0: configured with capacity of 133.63GB
AVAILABLE DISK SELECTIONS:
0. c1t0d0 <DEFAULT cyl 35679 alt 2 hd 255 sec 63>
/pci@0,0/pci8086,25e3@3/pci103c,3234@0/sd@0,0
1. c2t0d0 <DGC-DISK-0324 cyl 17444 alt 2 hd 255 sec 63>
/pci@0,0/pci8086,25e2@2/pci8086,3500@0/pci8086,3514@1/pci1077,138@0/sd@0,0
2. c2t1d0 <DEFAULT cyl 17444 alt 2 hd 255 sec 63>
/pci@0,0/pci8086,25e2@2/pci8086,3500@0/pci8086,3514@1/pci1077,138@0/sd@1,0
Specify disk (enter its number):
-----------------------------------------------------------
As you can see, it not possible to label /dev/rdsk/c2t0d0p0, what to do ?
Other question, I only have one Lun affected to that server why do I have 3 disks ?
Thanks
Djessi
I have connected a server running Solaris 10 x86 to a storage, it looks like trials and errors have generated
many bad disks, I now want to remove them and reboot the system to get a normal situation, please which
command to use ? I'll continue with system file and mounting, please tell me commands syntax or a link
to achieve that.
By the way, I executed "devfsadm -C" and rebooted the system.
The "format" command shows this :
-----------------------------------------------------------
Servxap@root:${PWD}>format
Searching for disks...
The device does not support mode page 3 or page 4,
or the reported geometry info is invalid.
WARNING: Disk geometry is based on capacity data.
The current rpm value 0 is invalid, adjusting it to 3600
Error: can't open selected disk '/dev/rdsk/c2t0d0p0'.
done
c2t0d0: configured with capacity of 133.63GB
AVAILABLE DISK SELECTIONS:
0. c1t0d0 <DEFAULT cyl 35679 alt 2 hd 255 sec 63>
/pci@0,0/pci8086,25e3@3/pci103c,3234@0/sd@0,0
1. c2t0d0 <DGC-DISK-0324 cyl 17444 alt 2 hd 255 sec 63>
/pci@0,0/pci8086,25e2@2/pci8086,3500@0/pci8086,3514@1/pci1077,138@0/sd@0,0
2. c2t1d0 <DEFAULT cyl 17444 alt 2 hd 255 sec 63>
/pci@0,0/pci8086,25e2@2/pci8086,3500@0/pci8086,3514@1/pci1077,138@0/sd@1,0
Specify disk (enter its number):
-----------------------------------------------------------
As you can see, it not possible to label /dev/rdsk/c2t0d0p0, what to do ?
Other question, I only have one Lun affected to that server why do I have 3 disks ?
Thanks
Djessi