I have been able to add an addtional drive to our raid array. This was accomplished using the Compaq utilities that came with the server. I would now like to add the available blank space on the added drive to my E: volume on the server. Disk 0 is setup as a basic drive. Is there some trick to doing this? Is there a utility that MS has available? I have tried using the diskpart utility, but apparently that only works if your disk was originally configured as a dynamic disk. Thanks for any help.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations IamaSherpa on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Adding drive space to a W2K SP4 Raid5 array
- Thread starter Sherm1701
- Start date
- Status
Similar threads
- Locked
- Question
- Locked
- Question