Adding/Deleting Phonesets in Symposium/CCM

[jeanvaljean]

I have added my phonesets, approx 20 of them, to my CCM. However, as the phones are not physically connected yet (even thoughtthey are programmed in the CS1K)I'm getting an "error" in the TYPE column. Will this clear up once the phones are registered (2004P2 sets)???

also,

How do you delete/remove tn's from Phoneset in CCM Config???

thanks,

24601

 

[Utreg]

If the phonesets are configured correctly (there is no need to physically connect them) the Error wil dissapear. Mayby a refresh will also do the trick.
The sets TN can be deleted in the Configuration via selecting a TN (click on the row) and press the <Delete> button.