Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chris Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
adding combo card to existing ip office
- Thread starter puss1946
- Start date
Shut it down with Manager Indefinite. Unplug it. Screw off the slot cover. Insert the card. Plug it back in. It will recognize it on a reboot. Might take a while to boot if it needs to upgrade the card. And you are done.
Dermis and feline can be divorced by manifold methods.*
*(Disclaimer for all advise given)--'Version Dependent'
Dermis and feline can be divorced by manifold methods.*
*(Disclaimer for all advise given)--'Version Dependent'
teletechman
Technical User
Are there any other combo cards in the system? The IPO will only handle 2, that being said power down the system and insert it in an open slot and power the system back up. The IPO will recognize the card and update it as necessary.
Mike
Mike
Here's info on how to physically install the cards equipment sheet - it also shows how many of each card can be installed.
- Thread starter
- #5
- Thread starter
- #6
- Status
