Adding Call Pickup to IP Phone

[gavL30]

Good Morning,

I need to assign a call pickup number on a key for an IP phone.

I'm trying the following but get a SCH0361

REQ: chg
TYPE: 1220
TN 244 1 9 22
ECHG yes
ITEM key 09 rnp SCH0361 (get the SCH after entering a SPACE after rnp - I believe the extension number needs to go in there??)

I already have GPUA enabled

Thanks!

 

[Firebird Scrambler]

I don't think you can assign more than one RNP key on a set. I did the following below today on a I2004 set.

REQ: CHG
TYPE I2004
TN 77 0
ECHG YES
ITEM KEY 22 RNP 3
KEY 6 RNP SCH1365
KEY 9 RNP SCH1365
KEY

I think you can only use KEY 22.

Firebird Scrambler
Nortel and Avaya Meridian 1 / Succession and BCM / Norstar Programmer

Very advance high level knowledge on the Linux BCM phone system.

Website

http://somertel.com