Adding an Analog Line 1

[mmcclarin]

I was curious how to add or copy a new analog line. I know how to add and copy a digital line but the analog setup seems to be a little different. Any help please?

 

[EddieDuece]

REQ: new
TYPE: 500
TN

or

REQ: cpy 1
TYPE: 500
CFTN

 

[GHTROUT]

It makes me all sad that people are not hearing the overlays that the system loads as they use LD20 to perform TN changes. Imagine the frustration after being told to make changes in LD20, then finding absolutly no documentation for the prompts in the books. It is a convenience, and a big one compared to waiting for a tape drive to spin to each load, but as I train my new people I make sure they know that the books assume you are using:

LD 10 for analog/500 sets
LD 11 for digital sets
LD 20 for printing a TN to find the DN
LD 22 for printig a DN to find the TN

After that is understood, they are free to perform everything in any load that works. As long as they know what overlay has loaded. That reminds me?! the following link is Nortel based, but logically organized and optimized - all free all the time:

http://www.MicroMERL.com

~

http://www.DeadPhone.com/

http://www.GHTROUT.com/

 

[johnpoole]

It makes me all sad that people

maybe not sad, but i agree.. if anyone thinks you can stat or new/chg IN ld 20, i hope they never need a manual or expect to certify

john poole
bellsouth business
columbia,sc