Adding Alcatel 1408 phone to PBX

[johntel]

Dear Sir,
How to add a Alcatel 1408 IP Phone to PBX

 

[holdmusic34]

Plug it in a DS port.

There's one with a hump. And one who can jump.

 

[amriddle01]

Alcatel? That's offensive

 

[intrigrant]

To add a thirth party you need the following ( in order of importance)
[ol 1]
[li]Knowledge of IP Office and it's requirements[/li]
[li]Management software[/li]
[li]VCM resources[/li]
[li]third party IP endpoint license[/li]
[li]Proper LAN Qos/VLAN setup[/li]
[li]PoE switch or a PoE injector[/li]
[/ol]

 

[holdmusic34]

There isn't an Alcatel 1408 IP phone. There isn't an Avaya 1408 IP Phone. He has a 1408. Plug it in a DS port.

Mind you, he didn't say which PBX. Who cares. Plug it in anyway.

There's one with a hump. And one who can jump.

 

[amriddle01]

Yeah, bolllocks to it, if it doesn't fit...make it

 

[Okkie26]

I think we got a winner here..

This guy definitely beats the 'PLZHELPME' dude in stupidity...

 

[amriddle01]

Seriously though John, that handset is a digital phone not an IP phone, it needs to be connected into the IP Office DS ports, it's not an IP phone that connects to the network

 

[intrigrant]

So, point 1 tackled the problem -> solved.

 

[johntel]

Sorry Sir for late response and the phones are Alcatel 4018 and 4028 IP Phones

 

[amriddle01]

Alcatel phones don't work on Avaya systems and vice versa

 

[johntel]

the Alcatel OmniPCX Office PABX system is working and some 4018 are connected but when i am adding new 4018 and 4028 but not adding.

 

[amriddle01]

This forum has nothing to do with Alcatel