Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Adding a VOIP phone

Status
Not open for further replies.

StephenWyker

Technical User
Jun 30, 2005
208
US
What is necessary to add a VOIP phone (or 3 for that matter) to my system. We just added offices on our third floor and we only have ethernet up there; so I thought; it might be cool to just put in IP phones ...

I'm connected to our lan via 100MB.

I have a DSM 32+, PRI, and ASM.... Do I need another module or just the phones and key codes?
 
Phones and keycodes should be all you need. Make sure your network is switched (no hubs).
 
Also make sure your supplier sells you the latest release VoIP phones. The 2002 part # will have a 92 in it and the 2004, I think, will have a B in the part #. The 76 part # 2002 phones do not support POS.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top