Adding a TMDI or DTI card to Opt. 11C

[Hairball1]

I have a Opt.11C with an existing TMDI card in it and need to add another for a PRI.
It seems that when at RLS 4 or higher, you can add trunks without purchasing a license from Nortel.
Is this true?
I think I just need to buy a DTI with down-loadable D-channel daughter board, but need assurance on the TN licensing for the trunks? Info on rls follows.
CALL SERVER/MAIN CAB
VERSION 2121
RELEASE 4
ISSUE 50 W +
IDLE_SET_DISPLAY NORTEL

 

[janaya]

You should be good to go. Just get the hardware. i don't recall any limitations to add T1's to the small systems.

John