Adding a second pri card ?

[tanjune]

We have a pri currently! But do you need a pri enabler for the second pri card to work? I have tried slapping in the card but it wont work and the system goes crazy. Im guessing I must need a second enabler for it to work? Can anyone advice please?

 

[biv343]

No PRI enabler keycodes are needed for BCM. Installing the card on an available bus, configuring the dip switches correctly and programming the module type appropriately should be all that is required.

 

[tanjune]

what is the dip setting for the second pri card?

 

[biv343]

Depends what bus you want to put it on. You'll need to check what busses are in use today before you can decide where you'll put another card.

 

[tanjune]

the first pri card is on 7.

 

[biv343]

If six is available, use that. I don't have the switch settings memorized. They're in the installation and maintenance manuals on your system.

 

[tanjune]

ok I will try 06 or 08.

 

[biv343]

Can't use bus 8 or bus 1 - those are reserved.

 

[tanjune]

Well I see a gatm8 on 06. and 5 is empty

 

[acewarlock]

Bus 5 Dip 5 & 6 OFF

 

[tanjune]

I will try it, then give an update!

 

[tanjune]

biv343, you are the man! Thanks I can get out and in on the second pri.