Hello there,
here is my situation :
server aix 5.2 already attached to SAN (MA8000) running acs 87F-3 in multibus failover. this server can see 3 mirrorset already running oracle databases throught 2 hba.
1 - i added 3 disks, initialized them, builted a raid unit (r42) and presented it to this host with : set d42 enable_access_path=conn1,conn2
d42 : is the storage unit containing the r42 (raid)
conn1 and conn2 are the existing connections.
2 - ran the cfgmgr
3 - lsdev -Cc disk : did not display the new disks
4 - rebooted the server, same result.
am i doing something wrong or missed something ?
latest securepath is installed.
help is appreciated. Thanx !
here is my situation :
server aix 5.2 already attached to SAN (MA8000) running acs 87F-3 in multibus failover. this server can see 3 mirrorset already running oracle databases throught 2 hba.
1 - i added 3 disks, initialized them, builted a raid unit (r42) and presented it to this host with : set d42 enable_access_path=conn1,conn2
d42 : is the storage unit containing the r42 (raid)
conn1 and conn2 are the existing connections.
2 - ran the cfgmgr
3 - lsdev -Cc disk : did not display the new disks
4 - rebooted the server, same result.
am i doing something wrong or missed something ?
latest securepath is installed.
help is appreciated. Thanx !