Adding a POTS line to a 6408D+ 3

[Mamoose]

Can one add a loop start 1FB as an bridged extension onto a 6408D+?

 

[AvayaTier3]

add personal-CO-line x

then change station and add "per-COline" button.

A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"

bsh

37 years Bell, AT&T, Lucent, Avaya
Tier 3 for 27 years and counting

http://bshtele.com

 

[Mamoose]

Thanks, what card does the 1FB terminate on?
Thanks again,
Mamoose

 

[AvayaTier3]

depends on your hardware.
tn747B
tn429D

media-gateway
mm711
mm714
mm714

built-in gateway modeules
1T2LIMAP
4T2LIMAP

A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"

bsh

37 years Bell, AT&T, Lucent, Avaya
Tier 3 for 27 years and counting

http://bshtele.com

 

[PBXTech]

CO Trunk

 

[wellco9530]

Then it would terminate on the TN 747 just line any other CO line..and you build a trunk group for it depending on what type of line it is ground start, loop start...tac...etc; thats all you need to do..also remember to make it dial access: y

Good Luck