Adding a New Area Code (574)

[dosev]

we have a CS1000 and i hope some can help me in adding area code 574 to our switch? in addition, is there a way to print out a list of the area codes already progammed?

thanks for your help.

 

[KCFLHRC]

Are you familiar with any programming? Getting into different loads, etc. If so then you will want to print an existing area code in LD 90

reg prt
cust 0
type net
tran ac1
type npa
npa 1214


Then add 574 and point it to the same RLI

req new
cust 0
type net
tran ac1
type npa
npa 1574
rli xx what ever rli it printed previously above

then return through the rest

 

[Splic3d]

To print the lists, like KCF pointed to = ld 90. reg prt
cust 0
type net
tran ac1
type npa
enter until list prints. Do the same for nxx's and spn's.

http://www.i3techgroup.com

Avaya/Nortel/NEC/Asterisk/Access Control/CCTV/DSX/Acti/UCx