I just picked up a PERC 4 RAID controller for my Dell PowerEdge 2600, and another 36 gig drive to match the one already in my server. I'm currently running windows 2000 SBS, and I have it all nice and set up how I like it. Am I going to have to reload my OS to add the controller and mirror? If so, is there a way around it with Ghost or something? Thanks.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Adding a mirrored drive to poweredge 2600?
- Thread starter ElClap
- Start date
xmario2013
IS-IT--Management
there should be a way to do this in Dell RAID management software with blowing the OS (before you boot to the OS check what key you need to hit), look up the manual for that RAID controller
back up everything still
XM
back up everything still
XM
- Status
