Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Adding a media card

Status
Not open for further replies.

RossV

Technical User
May 22, 2006
72
US
I'm moving a media card that was assigned in another CSE. Do I need to IP address it through direct connect to change the IP or can I address it through element manager. The IP address it held isn't compatible with the one it will hold but I'm not sure if the MC32 memory is held in NVRAM on the card or if it's wiped when power is removed from the card.
 
I'm think'n you gotta get on that card and CLI your changes, if power wiped configs, Nortel woud be extra broke

Mato' Was'aka
 
I was wondering if the MC32's config resided somewhere else and was downloaded to it when power was applied. I know the MGC has NVRAM but I wasn't sure about the MC.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top