Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
adding a keycode to a BCM 50????
- Thread starter tmaxx6940
- Start date
Im A CS1000 as well but im doing BCM also,first your need Element Manager to manage the BCM
To manually add a keycode file
1 Log on to Element Manager and select the BCM50 you want to access.
2 On the Task Navigation panel, click the Configuration tab.
3 Select the System folder and then click the Keycodes task.
4 Click the Modify Feature Licences Table button.
In the Modify Features Licences Table dialog box, select the feature you want to modify,and click the number in the data column.
In the Keycode box, enter the new 24-digit keycode and click the OK button.
You will love BCM they quite good and easy to manage
To manually add a keycode file
1 Log on to Element Manager and select the BCM50 you want to access.
2 On the Task Navigation panel, click the Configuration tab.
3 Select the System folder and then click the Keycodes task.
4 Click the Modify Feature Licences Table button.
In the Modify Features Licences Table dialog box, select the feature you want to modify,and click the number in the data column.
In the Keycode box, enter the new 24-digit keycode and click the OK button.
You will love BCM they quite good and easy to manage
- Status
Similar threads
- Question
