I am trying to add a pci video card to a netserver lh3. Cannot find documentation on how to disable onboard video; HP tells me there is no way to do it. When booting with the pci card in place it will start win2k, but then get a "nmi memory parity" error and it blue screens. Have tried disabling the onboard video device in win2k before installing the pci card, no go. Any ideas?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Adding 3rd party video card to netserver lh3
- Thread starter tonyfan
- Start date
Greetings,
I did a search on the HP site and found this link of discussions - they might not be relevant to your specific system, but they are related to your problem:
Good luck!
Kindest regards,
James
I did a search on the HP site and found this link of discussions - they might not be relevant to your specific system, but they are related to your problem:
Good luck!
Kindest regards,
James
- Status
