Adding 3rd Base Station to Companion

[joelunchpail]

Is there some issue with 2nd and 3rd base stations not working well when connected to the MICS main module?
I have been told I should install a 6 port expansion card and a an expansion module attached to " the last port " otherwise there will be some compatibility problems.

joelunchpail

 

[sprucegrover]

Companion base station have to be the 'highest numbered' station port in the system. That is, no sets connected to ports higher than the BS's.
If you now have an unexpanded MICS, then the 3 base station should be on ports 130,131, & 132. If you have to expand your system to accomodate an extra stations, add a 2-port expansion card and a station mnodule, then connect the base stations to the highest in the expansion module, 314, 315 & 316

 

[joelunchpail]

I'll have to get a new GURU I was led to believe that there was some problem having more than one base station on a non expanded MICS.