Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Adding 2nd LIM in Routes

Status
Not open for further replies.

blueprint321

Technical User
Oct 15, 2012
1
AU
Hi Lads,

First time poster longtime viewer :)

Any help much appreciated.

Bit of background details

I currently have 3 MX-ONE's as one logical system at our mainsite and three MD-110's at 3 other campuses all connected via a WAN.

The internal routes beteeen sites failover as follows;
0. IP Trunk (remote sites point to LIM 1 at mainsite)
1. Microwave
2. Onramps

With the possibility of LIM 1 failing I'd like to add LIM 3 as the second option in the routes (option 1) - the idea is that if LIM 1 fails users on LIM 2 and 3 should still be able to receive calls from the other internal sites over the IP trunks.

Problem

I've tested adding in LIM 3 as the first choice just to see if calls connect and they do not. Is it possible to have a LIM other than the first 1 to handle internal route traffic?

If so can, can someone point me in the directions of the commands I should be using

Cheers

Blue







 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top