Added T-1 card

[eseibert]

I've added a T-1 card in a Merlin Legend system I have. Question I have is, what do I need to do in order to have my users use the T-1 instead of the pots lines that are currently set up. I want to leave a couple of pots lines for backup. So far the T-1 is set up in a pool, but I would like to set up the ARS so that they can just select a line and then based on the type of call (i.e., if its 800 number, it has to go out on the pots line). At least that is what I've been told. The release level of the legend is 6.0. Any help would be appreciated.

 

[ken1713]

Go into tables, ars, sub a pools, 171 for table and route remove the 70 pool and put in your pool for the t1, thats for default toll. Do the same thing for local, tables, ars, sub a pools, 181 for table and route. Go into tables ars input select a table make it area code and put in your 800 numbers. Sub a pools table and route and put in the 70 pool. Thats assuming your pots lines are in the 70 pool and your t1 in a different pool.