Addding new MM760 cards

[Magillicuddy]

I cant find how to do this on the avaya support site all the ref material just describes the card it self..

I have three mm760 boards and i have 3 new ips what commands do need ?

can you point me to a document ? thank you


I am adding hese into out G700

can I do this in ASA or do i neeed to telnet in to do this

 

[caspian11]

1)Log into the G700 using either the console port with HyperTerminal, or telnet 127.1.1.11 from Linux prompt. The default login is root/root.
2)If logged into console port, you should see "P330" in prompt. Type "session mgp".
3)If you telnet 127.1.1.11, you should already be at MGP prompt.
4)"config"
5)"set interface voip vX (X being the slot the MM760 is in) xxx.xxx.xxx.xxx". No need to enter subnet or gateway, it will adopt the info assigned to the MGP.
6)Reset the module.
7)To access other G700's in the stack, either move the console cable to that G700, or "exit" back to the P330 prompt and "session x mgp", x being the number of the G700 in the stack.