Add TIE trunks to existing T1 services

[samorse]

I have a T1 setup as a TIE in a Legend R7 with 4 trunks existing. I am trying to add 4 more, lines 6817, 6818, 6819 and 6820. They show maintenance busy, but telco tells me they are idle on their end. If I busy out and release, they still show maintenance busy. If I try to copy an existing line, i.e. 6813 to 6817, it won't. If I try to configure the lines in inmode and outmode, they won't. I have rebooted the switch and nothing. They lines are configured for the T1 card when I inventory it. At this point, I don't have a clue what the problem is.

Thanks,
Sam

 

[merlinman]

I would suggest that you Print and Post Lines & Trunks General and Tie Lines and see if that gives us some insight as to what may be wrong.

http://home.comcast.net/~merlinman

 

[samorse]

Here is the print-out. I am trying to add 6817 through 6820.

A TRUNK INFORMATION


A TIE TRUNK INFORMATION


A TRUNK 6809 Slot/Port : 3/ 1
A Direction: 2 Way E&M Signal: Type1S Dialtone : Remote
A InType : Wink InMode : TouchTone AnsSupvr : 600 ms
A OutType : Immed OutMode : TouchTone Disconnect: 600 ms

A TRUNK 6810 Slot/Port : 3/ 2
A Direction: 2 Way E&M Signal: Type1S Dialtone : Remote
A InType : Wink InMode : TouchTone AnsSupvr : 600 ms
A OutType : Immed OutMode : TouchTone Disconnect: 600 ms

A TRUNK 6811 Slot/Port : 3/ 3
A Direction: 2 Way E&M Signal: Type1S Dialtone : Remote
A InType : Wink InMode : TouchTone AnsSupvr : 600 ms
A OutType : Immed OutMode : TouchTone Disconnect: 600 ms

A TRUNK 6812 Slot/Port : 3/ 4
A Direction: 2 Way E&M Signal: Type1S Dialtone : Remote
A InType : Wink InMode : TouchTone AnsSupvr : 600 ms
A OutType : Immed OutMode : TouchTone Disconnect: 600 ms

A TRUNK 6813 Slot/Port : 4/ 1 Toll
A Direction: 2 Way E&M Signal: Type1S Dialtone : Remote
A InType : Wink InMode : TouchTone AnsSupvr : 300 ms
A OutType : Wink OutMode : TouchTone Disconnect: 300 ms

A TRUNK 6814 Slot/Port : 4/ 2 Toll
A Direction: 2 Way E&M Signal: Type1S Dialtone : Remote
A InType : Wink InMode : TouchTone AnsSupvr : 300 ms
A OutType : Wink OutMode : TouchTone Disconnect: 300 ms

A TRUNK 6815 Slot/Port : 4/ 3 Toll
A Direction: 2 Way E&M Signal: Type1S Dialtone : Remote
A InType : Wink InMode : TouchTone AnsSupvr : 300 ms
A OutType : Wink OutMode : TouchTone Disconnect: 300 ms

A TRUNK 6816 Slot/Port : 4/ 4 Toll
A Direction: 2 Way E&M Signal: Type1S Dialtone : Remote
A InType : Wink InMode : TouchTone AnsSupvr : 300 ms
A OutType : Wink OutMode : TouchTone Disconnect: 300 ms

A TRUNK 6837 Slot/Port : 9/ 1
A Direction: 2 Way E&M Signal: Type1S Dialtone : Remote
A InType : Wink InMode : TouchTone AnsSupvr : 300 ms
A OutType : Wink OutMode : TouchTone Disconnect: 300 ms

A TRUNK 6838 Slot/Port : 9/ 2
A Direction: 2 Way E&M Signal: Type1S Dialtone : Remote
A InType : Wink InMode : TouchTone AnsSupvr : 300 ms
A OutType : Wink OutMode : TouchTone Disconnect: 300 ms

A TRUNK 6839 Slot/Port : 9/ 3
A Direction: 2 Way E&M Signal: Type1S Dialtone : Remote
A InType : Wink InMode : TouchTone AnsSupvr : 300 ms
A OutType : Wink OutMode : TouchTone Disconnect: 300 ms
A TRUNK INFORMATION



A TRUNK 6840 Slot/Port : 9/ 4
A Direction: 2 Way E&M Signal: Type1S Dialtone : Remote
A InType : Wink InMode : TouchTone AnsSupvr : 300 ms
A OutType : Wink OutMode : TouchTone Disconnect: 300 ms
A TRUNK INFORMATION


A DID TRUNK INFORMATION


A Trk SS/PP Blk DiscTime Type ExpDig DelDig AddDig Signal InvDest
A TRUNK INFORMATION


A GS/LS TRUNK INFORMATION


A Trk SS/PP Type OutMode RelDisc ChannelUnit LS-ID Delay
A 6801 1/ 1 Ground TouchTone N/A N/A N/A
A 6802 1/ 2 Ground TouchTone N/A N/A N/A
A 6803 1/ 3 Loop TouchTone Yes N/A N/A
A 6804 1/ 4 Loop TouchTone Yes N/A N/A
A 6805 2/ 1 Ground TouchTone N/A N/A N/A
A 6806 2/ 2 Loop TouchTone Yes N/A N/A
A 6807 2/ 3 Loop TouchTone Yes N/A N/A
A 6808 2/ 4 Loop TouchTone Yes N/A N/A
A TRUNK INFORMATION


A GENERAL TRUNK INFORMATION


A QCC QCC Extern
A Trk SS/PP RemAccess Pool TlPrfx HldDisc Principal Prty Oper Switch
A 6801 1/ 1 No Remote 70 Yes Long 4
A 6802 1/ 2 No Remote Yes Long 4
A 6803 1/ 3 No Remote Yes Long 4
A 6804 1/ 4 No Remote Yes Long 4
A 6805 2/ 1 No Remote Yes Long 4
A 6806 2/ 2 No Remote Yes Long 4
A 6807 2/ 3 No Remote Yes Long 4
A 6808 2/ 4 No Remote Yes Long 4
A 6809 3/ 1 No Remote 8 Yes Long 4
A 6810 3/ 2 No Remote 8 Yes Long 4
A 6811 3/ 3 No Remote 8 Yes Long 4
A 6812 3/ 4 No Remote 8 Yes Long 4
A 6813 4/ 1 No Remote 6890 Yes Long 4
A 6814 4/ 2 No Remote 6890 Yes Long 4
A 6815 4/ 3 No Remote 6890 Yes Long 4
A 6816 4/ 4 No Remote 6890 Yes Long 4
A 6817 4/ 5 No Remote Yes Long 4
A 6818 4/ 6 No Remote Yes Long 4
A 6819 4/ 7 No Remote Yes Long 4
A 6820 4/ 8 No Remote Yes Long 4
A 6821 4/ 9 No Remote Yes Long 4
A 6822 4/10 No Remote Yes Long 4
A 6823 4/11 No Remote Yes Long 4
A 6824 4/12 No Remote Yes Long 4
A 6825 4/13 No Remote Yes Long 4
A 6826 4/14 No Remote Yes Long 4
A 6827 4/15 No Remote Yes Long 4
A 6828 4/16 No Remote Yes Long 4
A 6829 4/17 No Remote Yes Long 4
A 6830 4/18 No Remote Yes Long 4
A 6831 4/19 No Remote Yes Long 4
A 6832 4/20 No Remote Yes Long 4
A 6833 4/21 No Remote Yes Long 4
A 6834 4/22 No Remote Yes Long 4
A 6835 4/23 No Remote Yes Long 4
A 6836 4/24 No Remote Yes Long 4
A 6837 9/ 1 No Remote Yes Long 4
A 6838 9/ 2 No Remote Yes Long 4
A 6839 9/ 3 No Remote Yes Long 4
A 6840 9/ 4 No Remote Yes Long 4
A 6841 0/ 0 No Remote Yes Long 4
A 6842 0/ 0 No Remote Yes Long 4
A 6843 0/ 0 No Remote Yes Long 4
A 6844 0/ 0 No Remote Yes Long 4
A 6845 0/ 0 No Remote Yes Long 4
A 6846 0/ 0 No Remote Yes Long 4
A 6847 0/ 0 No Remote Yes Long 4
A 6848 0/ 0 No Remote Yes Long 4
A 6849 0/ 0 No Remote Yes Long 4
A 6850 0/ 0 No Remote Yes Long 4
A 6851 0/ 0 No Remote Yes Long 4
A 6852 0/ 0 No Remote Yes Long 4
A 6853 0/ 0 No Remote Yes Long 4
A 6854 0/ 0 No Remote Yes Long 4
A 6855 0/ 0 No Remote Yes Long 4
A TRUNK INFORMATION


A 6856 0/ 0 No Remote Yes Long 4
A 6857 0/ 0 No Remote Yes Long 4
A 6858 0/ 0 No Remote Yes Long 4
A 6859 0/ 0 No Remote Yes Long 4
A 6860 0/ 0 No Remote Yes Long 4
A 6861 0/ 0 No Remote Yes Long 4
A 6862 0/ 0 No Remote Yes Long 4
A 6863 0/ 0 No Remote Yes Long 4
A 6864 0/ 0 No Remote Yes Long 4
A 6865 0/ 0 No Remote Yes Long 4
A 6866 0/ 0 No Remote Yes Long 4
A 6867 0/ 0 No Remote Yes Long 4
A 6868 0/ 0 No Remote Yes Long 4
A 6869 0/ 0 No Remote Yes Long 4
A 6870 0/ 0 No Remote Yes Long 4
A 6871 0/ 0 No Remote Yes Long 4
A 6872 0/ 0 No Remote Yes Long 4
A 6873 0/ 0 No Remote Yes Long 4
A 6874 0/ 0 No Remote Yes Long 4
A 6875 0/ 0 No Remote Yes Long 4
A 6876 0/ 0 No Remote Yes Long 4
A 6877 0/ 0 No Remote Yes Long 4
A 6878 0/ 0 No Remote Yes Long 4
A 6879 0/ 0 No Remote Yes Long 4
A 6880 0/ 0 No Remote Yes Long 4
A DS1 INFORMATION



A DS1 SLOT ATTRIBUTES

A Slot Type Format Supp Signal LineComp
A 4 T1 ESF B8ZS Rob_Bit 1
A PRI INFORMATION

 

[SYQUEST]

The first thing I see is that your trunk signaling parameters are different for the analogue TIEs verses the four TIEs on the DS1 module. It looks like slots 3 and 9 have analogue and slot 4 is the DS1. The trunks in slot 9 are not assigned to any pool?

Are all these TIE trunks going to the same place?
Have you verified the parameters with the Telco for both inward and outward?
Are they in the same pool and are they used for the same purpose?

....JIM....

 

[samorse]

Correct, trunks in slot 9 are not programmed. All the TIE's are going to Telco (Qwest). According to smoke and mirrors (Qwest), the additional 4 members of the T1 are programmed just like the initial 4, and are showing idle on their end. I have added them to pool 6890. What confuses me is when I try to copy a line, it just beeps. Even if the trunks were down and/or non-existant, I should still be able to copy them.

 

[TravelingTom]

Your tie trunks in slot 4 are not all equipped.
In programming go to lines and trunks. go to ground/loop/DS1 and enter slot 4. under type enter T1. go to tie and enter 5, 6, 7, 8. Print out you tie trunk info to verify that they are in.