Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Adaptec 29320-ALP SCSI controller ... 1

Status
Not open for further replies.

mrdom

MIS
Oct 5, 2005
333
US
Hi everyone: I'm trying to find a way to monitor the SCSI RAID status on Windows 7. I just repaired a degraded array, but the only way I found it was doing a routine restart ... I just happened to notice the status as the card sequenced through the LUN numbers. After visiting Adaptec's web site, it looks as though the Storage Manager software doesn't support the ALP, although it is compatible. This was all I could find:


Does anyone have the storage manager software or another program working to monitor RAID status on their Adaptec cards? Thanks for the help!
 
why not use the storage manager for the actual card? same web site. found here May need to use compatibility mode.
 
I looked at that compatibility list half a dozen times, and it never stood out - today I saw it! Thanks rclarke! :)
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top