Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
AD Integration
- Thread starter Acydman
- Start date
If you are talking about web access, as I understand it, you either can set up access or block access with AD authentication wiythout having a user log in. This, from what I've heard over at Watchguard's forums, shall be addressed possibly in release 9.2 so that various AD groups can be used for varieous levels if web access.
Chris
IT Manager
Houston, Texas
Chris
IT Manager
Houston, Texas
PeterHurst
IS-IT--Management
I did experiment with FB1000 and AD - certainly with V7 software it worked but as I didn't see any great benefit (it didn't improve granularity of control) I went back to controlling logons locally in the Firebox.
As stated it was used to allow bypass of the web filtering controls. It is also used for PPTP VPN's but I didn't try that with AD.
As stated it was used to allow bypass of the web filtering controls. It is also used for PPTP VPN's but I didn't try that with AD.
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question
- Locked
- Question