Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

AD-8 and VMP voicemail modem

Status
Not open for further replies.

rosiej

Programmer
Jan 10, 2009
33
According to docs I have the AD-8 and VMP-U40 voicemails have built in modems and the default is 663. Doc says it can be changed in Easymade App, page 1, line 8. When I connect, on page one I have items 1-7 and when I do page down, page 2 starts at item 11. I have tried to arrow down and it will not go past item 7. How/where is the internal modem ext or ID set? Also if a MB has admin rights (not 632)can the admin rights be removed without deleting/re-adding the MB?
 
Don't know the U40 (it's not sold here to my knowledge) The AD8 is an in-skin VM and the modem appears on the first physical connection of the slot you have it installed in. In order to access that modem you have to programme up an analogue extension in the PABX and physically jumper it to the first port of the VM! As for the admin rights I believe you can remove them but I haven't done it in so long I can't remember how. If no one else comes up with the answer, I'll look it up.
 
Admin rights can be removed without deleting the mailbox. Select the delete option and look for additional options. You can delete messages, manager status and/or the entire mailbox.
 
Belvedere

Right I remember now F8 to add and select it in the menu box and I think F7 to delete and again select it.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top