If anyone out there has connected to the AD-4324 Weighing Indicator with RS232c option I would love to hear about it. I made the RS232c cable as specified in the manual and set the units function 33 to command mode. I get a datastring automatically transmitted from the 'Ser. Out' port, but cannot transmit or receive from the RS232c port. Any hints would be appreciated.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
AD-4324 Weighing Indicator+RS232
- Thread starter nullgod
- Start date
