Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Acts like I've got AP Isolation, but the setting is off

Status
Not open for further replies.
jason305

jason305

MIS
Jan 15, 2001
28
US
I've got 6 Clients (9x\me\xp\osx) connecting to a WRT54GS. All can connect to the Internet fine. However, peer-to-peer access is very limited and shakey. At best, any one PC can ping one other, but thats it. You might be able to see one other PC in the workgroup, but that's it.

So it looks like AP Isolation is active, but the setting is turned off. I have tried to update the BIOS, but no effect. It looks like this is a common issue from the searches I've done, but no real resolutions.

Any ideas?
 
Status
Not open for further replies.

Similar threads

techat21st
  • Locked
  • Question
Deny WAN but allow LAN
Replies
1
Views
126
goombawaho
goombawaho
john newman
  • Locked
  • Question
TO START OFF THANK YOU FOR ANY HELP
Replies
2
Views
100
ADB100
ADB100
Stealth1007
  • Locked
  • Question
Please help with DD-WRT bandwith issues when Panasonic NS700 is connected
Replies
1
Views
135
goombawaho
goombawaho
Ballzington
  • Locked
  • Question
Ubiquiti Airrouter adding a Unifi ap
Replies
0
Views
66
Ballzington
Ballzington
Shad0wguy
  • Locked
  • Question
UniFi APs not issuing DHCP on new VLAN
Replies
1
Views
101
eddiebullman
eddiebullman

Part and Inventory Search

Sponsor

Back
Top