Active Voice mail to a Nortel DR5 system thru a VMI 1

[trslater]

Any one put in a Active Voice Mail using VMI (Voice Mail Intergration) to a DR5 KSU.

Thanks

 

[curlycord]

You are better off asking what problem you are having!
I'm sure many here have.

 

[trslater]

The problem is when you dial pilot number 256 you get main greeting then dial a station it said transfering now, it waits then disconnects. All stations are CFB and CFNA to voice mail pilot number 256.

The VMI's are 900 and 901 with DN 256, 257, 258, 259, message lite on is Link*1, off Link#1, transfer is Link*70, predigits=none disconnect is ****. The program in the phone system is CFB 256 to 257 to 258 to 259 to 256, CFNA 256 to 257 to 258 to 259 to 256, intercom set to 1 and set abilities set to no and none

Also when you dial the pilot number it answers and if some one else dials the same pilot one of two things happen, 1st it shows already joined and gets a fast busy or 2nd it goes to the general delivery mail box.

After a msg is left the msg shows on the station you press it and it dials the dn number that left the message and you get the main greeting instead of asking for password.

Any help thanks

 

[luv2ski]

first norstars dont do circular hunts so dont loop back..thats my 2 cents

Pat Guido
NEXTIRAONE
Pat.guido@nextiraone.com

Formerly Nextira, formerly Williams Communications, formerly Wiltel, formerly Nortel networks, formerly Northern Telecom, formerly, Nynex meridian systems formerly Northern Telecom.