activate-deactivate a station on Hipath 4000

[omnitax]

Hi all,

Is it possible to activate-deactivate a station (phone) with
some AMO command and if so what is the syntax of the command ?.

Thanx for help

 

[donb01]

Try DEA-DSSU

I haven't had to do it yet on the 4000, but some things are pretty similar to 9006.

There should be a choice of DI (deativate immediately) or DC (Deactivate conditionally - when the person hangs up).

Your type would be STN or STNO
and then provide the extension.

You can also deactivate by PEN if necessary.

ACT-DSSU would turn it back on, and in that case you would use AUL for the activation type.

 

[lhiraman]

Yeap don you are correct. I used these commands on our 4000!