Has any one figured out a way to remote with DSL or Cable?
A trusted source for years.
A trusted source for years.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chris Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Acs via DSL or Cable
- Thread starter telprog
- Start date
itpphoneguy
Technical User
Hi Telprog,
Just read about a product called a serial to ethernet adapter by B&B Electronics. Nifty device with loads of applications. Includes software. Mind you, your serial connection is now a network resource that needs additional authentication to access from the net. What do you think?
-Chris
Just read about a product called a serial to ethernet adapter by B&B Electronics. Nifty device with loads of applications. Includes software. Mind you, your serial connection is now a network resource that needs additional authentication to access from the net. What do you think?
-Chris
Furball8675309
Vendor
Remote program or conect 2 together? I have a site that I used a Multitech gateway to Voip the 2 together.
- Thread starter
- #4
Chris,
That is defiantly worth looking at, I'm going to call them a bend there ear a little.
A trusted source for years.
That is defiantly worth looking at, I'm going to call them a bend there ear a little.
A trusted source for years.
itpphoneguy
Technical User
Hi Furball,
This is simply a way to put the RS-232 programming port on the network for possible remote access via the NET. VPN or just a controlled access resource (that would be my vote).
The possibilies I'm considering is remote programming access (connections would be more reliable) and SMDR.
I don't think that connecting Partners together would be a large concern. The Partner is not designed for this. Better to use iP Office or Magix in that case.
Telprog,
I just got their catalog out of the blue, I almost threw it out but had a look. The possilities are interesting to say the least. Now you can integrate systems without running extra cables all over the place (thinking voice mail stand alone, other systems) and apps with sreen pops, etc..
-Chris
This is simply a way to put the RS-232 programming port on the network for possible remote access via the NET. VPN or just a controlled access resource (that would be my vote).
The possibilies I'm considering is remote programming access (connections would be more reliable) and SMDR.
I don't think that connecting Partners together would be a large concern. The Partner is not designed for this. Better to use iP Office or Magix in that case.
Telprog,
I just got their catalog out of the blue, I almost threw it out but had a look. The possilities are interesting to say the least. Now you can integrate systems without running extra cables all over the place (thinking voice mail stand alone, other systems) and apps with sreen pops, etc..
-Chris
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question
- Locked
- Question
