Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations biv343 on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

ACS server on dmz

Status
Not open for further replies.
kevint21

kevint21

Programmer
Apr 25, 2001
52
GB
Hello, i have 2 ACS servers (1 primary, 1 secondary). The primary writes full backup to secondary every hour. But now i have moved the secondary onto the dmz the primary can no longer see it. It can ping it, as i have allowed it through the ASDM firewall.

Q What port should i enable so that the primary can read/write to the secondary across the DMZ?

Answers appreciated.
Kevin
 
Status
Not open for further replies.

Similar threads

testman1
  • Locked
  • Question
SIP telephone ring on second call
Replies
0
Views
225
testman1
testman1
stanlyn
  • Locked
  • Question
HowTo Install Multiple PAP2T ATA Devices on Same Lan
Replies
3
Views
316
iggsterman
iggsterman
NavinNet
  • Locked
  • Question
Why 2 different mac addresses of a server are being shown of CISCO 6509E Layer-3 Switch ?
Replies
0
Views
158
NavinNet
NavinNet
bfordz
  • Locked
  • Question
new help on setting up third party VoIP phones through Catalyst 2960x switch
Replies
0
Views
206
bfordz
bfordz
serge9
  • Locked
  • Question
Cisco GUI on cme stop working
Replies
2
Views
254
serge9
serge9

Part and Inventory Search

Sponsor

Back
Top