ACS R7 and paging

[cycochris]

I have a customer that has a ACS R7 using 6 lines and 14 extensions. Int the paging port they have a viking pa2a that rings on line 1 and a couple of horns for paging.
They added a second business and would like to have an additional line to ring to a different location and other horns to page the same location as the new horns.
I know they cant accomplish this with the current pa2a, but could they add a second pa2a to a line port? (i think not) Or do we just have to go to an amp with zones?

 

[skip555]

you can add the pa2a to a trunk port for page and the lines would just hook directly to the pa2a for ring

you might be able to run them both to the same horns , call viking and check they have great teck support

 

[dagwoodsystems]

skip555 is right as usual. The PA-2A is actually designed to do both things. A few wire changes and you are good to go!