ACS R5 to R6 upgrade

[cjd8009]

I have a R5 processor and it is backed up. I have a R6 processor that I want to replace the R5 with. Is there anyway to do this without manually inputting all the data. What if I upgrade the R5 to a R6 then back it up and put it on the R6. The problem with the R5 is the music input no longer works and we need to resolve that problem.

Thanks.

 

[TouchToneTommy]

You would need to upgrade the R5 to R6, back up the config to the PC card, then move the card to the new R6 and restore the config.

It's probably just a broken solder joint where the RCA jack is mounted to the circuit board (assuming you've checked #602)