telcorookie
Technical User
- May 21, 2009
- 141
Hi all, for some reason the last line used will not disconnect after hanging up. I have tried resetting system. Any ideas?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
ACS R1 not releasing line
- Thread starter telcorookie
- Start date
- Status
swap with a line that works and test then to see if it is the line or the pone system. Maybe the line provider has no reliable disconnect on the last line.
Or unplug the last line when on the phone and see if the port goes idle then it is the line without reliable disconnect because that is nothing but a voltage drop on the line for 500ms.
Joe W.
FHandw., ACS
I don't suffer from insanity
I enjoy every moment of it
Or unplug the last line when on the phone and see if the port goes idle then it is the line without reliable disconnect because that is nothing but a voltage drop on the line for 500ms.
Joe W.
FHandw., ACS
I don't suffer from insanity
I enjoy every moment of it
- Status
Similar threads
- Question
- Locked
- Question
- Locked
- Question
- Locked
- Question
