acpi message when Installing w2k server

[pptpv]

Hi all

I've
NL94510J.86A.0017.2007.0828.11 Bios Versión
Processor Type Intel Pentium 4 CPU 3.00 Intel EM64T Capable
Processor Speed 3.00
System Bus Speed 800 MHz
System Memory Speed 667 MHz

installed on a Intel 945 mother board, and a 160 gb wdc wd1600aajs-0 sata hard disk attached

So when I try to install Windows 2000 server the screen shows something like this

a blue screen with
*** stop: 0x000000A5 etc......
The ACPI BIOS in this system in not fully compliant with the ACPI specifications........


When installing w2k server I try the 'F7' key to disabl key but nothing happens, at the point of 'Installing Windows server 2000' freezes and stays there

Do you have any ideas ?

 

[rclarke250]

Install the storage controller drivers when prompted.

 

[pptpv]

Hi rclarke250, do you know any link to download the stotage controllers ?

 

[rclarke250]

I would think whoever made the system board, or computer should have drivers available, or you can use the intel generic drivers from them for the 945 chipset, as long as it doesn't use a different sata chip should work.