Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations dencom on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

ACOD number

Status
Not open for further replies.

BumgarCN

Programmer
Jan 12, 2010
55
US
Can an ACOD number for a paging trunk be dialed from a DISA line? When I dial in to the DISA number, I can dial the ACOD number for all the acutal outside line groups but get a reorder tone when I dial the paging trunk ACOD. I am thinking it may not be possible.
 
Is the route programmed as an actual Page Route or is it programmed like a co or fx route?
 
From the NTP

Call Page Network Wide (PAGENET)
Paging trunk routes must have the response PGNU programmed for the
NACC prompt in LD 16 (RDB) in order to allow DISA access from (Central
Office [CO], Foreign Exchange [FX], Wide Area Telephone Service
[WATS]) or Direct Inward Dialing (DID) trunks.
 
It could be a TGAR issue also. Make sure there is no TARG on the route
 
Thanks, KCFLHTK. It was restricted in LD 16 (NACC-PGNU).
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top