Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

ACOD Barring

Status
Not open for further replies.
Blighter

Blighter

MIS
Aug 16, 2001
41
GB
Hi All

Does anyone know how to prevent ACOD being used to dial out instead of AC1 and AC2?

Many thanks in advance for your help

Regards
Blighter
 
Sort by date Sort by votes
Hi all

Hold your fire, I've found it in the NTP's!

TGAR and TARG are specifically used for preventing ESN bypass.

Regards
Blighter
 
Upvote 0 Downvote
On a trunk(Under RDB LD 16) you will have a TARG, default is 01. If this is programmed and all of your phones have a TGAR 1 they can not ACOD dial. You will need a TGAR of 0 on a telephone set to be able to dial out.

Tim Russell
 
Upvote 0 Downvote
Tim

I solved this issue a little while ago, but thanks for the info anyway.

Regards
Blighter

 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

trmg
  • Locked
  • Question
Option 11C - COT via ACOD Question
Replies
14
Views
328
trmg
trmg
cardinalGLZ
  • Locked
  • Question
ACOD not dialing out trunk
Replies
10
Views
223
cardinalGLZ
cardinalGLZ
larry312
  • Locked
  • Question
PRI can't make local calls using ACOD
Replies
7
Views
179
larry312
larry312
RV482
  • Locked
  • Question
ACOD on Option61 and Cisco IP router
Replies
8
Views
140
RV482
RV482
freitaslc
  • Locked
  • Question
ACOD - ACCESS CODE "x6XXX"
Replies
2
Views
104
freitaslc
freitaslc

Part and Inventory Search

Sponsor

Back
Top