acl deny

[eTTan]

Hi All!!

I have configured a ipsec tunnel between to pix firewalls and when i was at the remote site and installed the pix 501 everything worked ok, no trouble at all, i could ping the servers at our main office.
But after this weekend i'm back at the main office and now the tunnel doesn't work.
I tried to ping one of the servers at the remote site but nothing happens and from the debug on the main office pix i get this, IPSEC(sa_initiate): ACL = deny; no sa created.


Thanks!

Johan

 

[routerman]

Can you get someone at the remote offic to test that again, to see if the incoming VPN works?

Post up your config if your still having problems, may be able to spot what's gone wrong.